5G Backhaul Explained: Fiber, Microwave and IAB Compared
A 5G network needs more than radio coverage to operate. Once devices connect to a base station, their data must travel through the network to reach the core and the services they need.
Backhaul connects the radio access network to the 5G core, carrying the traffic generated by connected devices. Its capacity, latency and availability directly affect the overall network performance.
In private 5G deployments, choosing the right backhaul technology is an important part of network design. Fiber, microwave links and Integrated Access and Backhaul (IAB) offer different advantages, depending on the environment, the required performance and the time available for deployment.
In this article, we explain how these technologies work, compare their main characteristics and look at two wireless connectivity scenarios tested by SMA-RTY during DiBaX 2026. For a closer look at when fiber can be replaced by wireless connectivity, see our companion article Do you really need fiber everywhere for private 5G?.
What is 5G backhaul?
5G backhaul is the connection that carries traffic from the radio access network to the 5G core network. When a device sends data, the base station receives it and forwards it through the network towards the core, where user authentication, network policies and traffic routing are handled.
Backhaul is therefore a fundamental part of the end-to-end connectivity path. Even when radio coverage is available, the network cannot deliver its services effectively if the connection between the radio infrastructure and the core is insufficient.
The difference between fronthaul, midhaul and backhaul
In a 5G network, the base station can be divided into different functional elements: the Radio Unit (RU), which handles the radio signal, the Distributed Unit (DU) and the Centralized Unit (CU), which perform different baseband processing functions.
The connections between these elements have different names:
- Fronthaul connects the Radio Unit (RU) to the Distributed Unit (DU).
- Midhaul connects the Distributed Unit (DU) to the Centralized Unit (CU).
- Backhaul connects the radio access network, typically through the CU, to the 5G core network.
The exact arrangement depends on the network architecture and how its functions are deployed. In private 5G networks, some elements can be hosted on the same equipment or at the same location, reducing the number of separate transport links required. However, connectivity between the radio access network and the core remains essential.

Why backhaul is different in a private 5G network
In public mobile networks, backhaul is part of a wider transport infrastructure, connecting base stations across cities and regions to the operator's core network.
In a private 5G network, the scenario is often different. The core network can be deployed directly on the premises, while radio units are distributed across a more limited area, such as an industrial facility, a port or a temporary operational site.
The distances may be shorter, but the deployment conditions can be more challenging. Infrastructure may not be available everywhere, sites may be under construction or subject to frequent changes, and installing new cables may require significant time and civil works.
The challenge is therefore to find a suitable way to connect each radio unit to the rest of the network, while meeting the required performance and deployment constraints.
5G backhaul technologies: Fiber, Microwave and IAB
There are different ways to connect a 5G radio access network to its core. The most suitable option depends on factors such as required capacity, distance, deployment conditions and available infrastructure.
Fiber optic
Fiber optic is often the preferred solution for fixed, high-capacity connections. It provides very high bandwidth, low latency and reliable performance, without being affected by radio interference or weather conditions.
Once installed, fiber can support increasing traffic requirements through upgrades to the equipment at either end of the connection, without replacing the cable itself.
Its main limitation is the installation process. Trenching, ducts, permits and civil works can increase both deployment time and costs. This can make fiber less practical in temporary environments, remote locations or areas where existing infrastructure is limited.
Point-to-point microwave and millimeter-wave links
Microwave and millimeter-wave systems provide wireless connectivity between two fixed points. They typically use directional antennas aligned towards each other to establish a dedicated radio link.
They can offer high capacity and can often be deployed much faster than fiber, particularly when suitable infrastructure is already available for mounting the antennas.
The main requirement is a suitable radio path between the two locations. Traditional point-to-point microwave links generally require line of sight, while performance at higher frequencies can be more sensitive to rain, obstacles and other propagation conditions.
These solutions also require dedicated radio equipment and careful planning, including antenna alignment, frequency selection and link-budget calculations.
Integrated Access and Backhaul (IAB)
Integrated Access and Backhaul (IAB) is a 5G technology introduced in 3GPP Release 16. It allows a 5G node to provide radio access to user devices while using the same wireless infrastructure to receive and forward its own backhaul traffic.
An IAB node connects wirelessly to a donor base station, which provides the connection towards the rest of the network. Additional IAB nodes can be deployed to extend connectivity further, creating multi-hop paths where required.
One of the main advantages is that no dedicated wired backhaul connection is needed at every node. This makes IAB particularly interesting for temporary deployments, remote areas and scenarios where extending fiber infrastructure would be difficult or time-consuming.
However, access and backhaul share radio resources. The available capacity therefore depends on the network configuration and traffic distribution, and additional hops introduce further resource consumption and latency.
Depending on the topology and configuration, IAB networks can also support alternative or redundant paths to improve connectivity resilience. For a more detailed explanation of donors, nodes and the BAP routing layer, read our IAB explainer.
5G backhaul technologies compared
Each technology has its own strengths and limitations. The table below provides an overview of their main characteristics and the scenarios in which they are generally most suitable.
| Criterion | Fiber | Microwave link | IAB |
|---|---|---|---|
| Capacity | Very high, scalable through equipment upgrades | High, depending on frequency and distance | Shared between access and backhaul; affected by the number of hops |
| Latency | Very low | Low | Low, with additional delay depending on the number of hops |
| Deployment time | Weeks to months, depending on civil works | Often days, depending on site conditions | Short, as it reuses the 5G radio infrastructure |
| Line of sight | Not required | Generally required | Depends on frequency band and radio conditions |
| Resilience | High; redundancy requires alternative routes | A single link needs duplication for redundancy | Alternative paths can be configured, depending on topology |
| Best fit | Permanent sites with high traffic requirements | Fixed locations with a suitable radio path | Remote, temporary or changing deployment environments |
How to choose the right 5G backhaul
There is no single backhaul technology that fits every deployment. The choice should be made for each connection, taking into account the operational requirements and the characteristics of the site.
Three main aspects can help guide the decision:
-
Deployment conditions and duration. Is the infrastructure permanent or temporary? A fixed installation with long-term requirements may justify the investment in fiber. A temporary site or an area that changes frequently may benefit from a wireless solution.
-
Traffic requirements. How much data will the connection need to carry? Links aggregating traffic from several radio units, particularly when video and other data-intensive services are involved, require sufficient capacity and room for future growth. With IAB, the available resources must also be considered across access and backhaul connections.
-
Distance and radio conditions. Is there a suitable path between the two locations? Point-to-point microwave links generally require line of sight, while IAB can use intermediate nodes to extend coverage across multiple radio hops, depending on the available propagation conditions and network topology.
In many private 5G deployments, the most effective approach is to combine different technologies. Fiber can connect fixed, high-traffic locations, microwave links can provide dedicated connectivity between suitable points, and IAB can extend the network where installing cables is not practical.
These solutions are not necessarily mutually exclusive. Network requirements can change over time, and a connection initially provided through a wireless link may later be upgraded or replaced with fiber as traffic increases. For a more detailed discussion of this decision in private 5G environments, see Do you really need fiber everywhere for private 5G?.
Wireless connectivity in the field: SMA-RTY at DiBaX 2026
In October 2026, SMA-RTY took part in NATO's Digital Backbone Experimentation (DiBaX 2026) in Latvia, demonstrating five use cases based on NGCI®, our private standalone 5G network.
Two of these scenarios focused on extending connectivity through wireless links, addressing different operational requirements. One connected two remote sites, while the other used an airborne IAB node to provide coverage in an area beyond the reach of the main base station.
Both demonstrate how wireless technologies can support private 5G deployments when traditional wired infrastructure is unavailable or impractical. More details about the five scenarios are available in our press release on DiBaX 2026.
Fixed Wireless Access (FWA): connecting two remote sites
The first scenario involved a main operational base and a second site located approximately 2.2 kilometres away. The two locations needed to exchange data continuously, but no wired infrastructure was available between them.
We established a dedicated 5G wireless connection between the sites, integrating NATO communication systems at both ends.
The radio equipment was installed on masts reaching approximately 30 metres in height, helping to clear surrounding trees and buildings. Directional antennas were used to focus the radio signal towards the other site and improve the link budget.
This was particularly important because, at around 4 GHz, commercial user devices operate with limited transmission power. Antenna gain and careful radio planning therefore play an important role in establishing a reliable connection over this distance.
The link achieved an aggregate throughput of approximately 150 Mbps, with around 90 Mbps in downlink and 65 Mbps in uplink. Connectivity was tested in line-of-sight, near-line-of-sight and non-line-of-sight conditions, with lower performance in the latter case.
This scenario demonstrates how a dedicated 5G wireless connection can link geographically separated sites without requiring a physical cable between them, while supporting the integration of existing communication systems.
IAB: extending coverage with a drone
The second scenario focused on a team operating in mountainous or wooded terrain, where the signal from the main base station may not reach the operational area directly.
Deploying a new base station and providing it with a wired backhaul connection would require additional infrastructure and time. IAB offers an alternative by allowing connectivity to be extended wirelessly.
For this demonstration, we mounted an IAB node on a drone. The node receives connectivity from a donor base station through its Mobile Termination (MT) function and provides radio access to nearby devices through its Distributed Unit (DU) function.
By positioning the drone above obstacles such as ridges or tree lines, it can establish a suitable radio connection with the donor while providing coverage to an otherwise difficult-to-reach area. No dedicated backhaul cable is required at the airborne node.
We also tested a tethered drone configuration. In this setup, power is supplied through the tether, reducing the limitations associated with onboard battery capacity and allowing the drone to remain airborne for extended periods.
This approach can provide a temporary elevated platform for an IAB node, combining rapid deployment with the flexibility to position connectivity where it is needed during an operation.
How SMA-RTY approaches backhaul
When designing a private 5G network, SMA-RTY considers the specific requirements of each deployment, including traffic distribution, required capacity, available infrastructure and site conditions.
With NGCI®, we assess the operational environment, the distribution of connected devices, traffic requirements and the available infrastructure before defining the most suitable connectivity architecture.
Depending on the scenario, this may involve fiber connections for fixed infrastructure, dedicated wireless links between remote sites or IAB nodes deployed on masts, vehicles or drones to extend network coverage.
The different technologies can be integrated within the same private 5G network, allowing the architecture to adapt to the specific requirements of each deployment and evolve as operational needs change.
Key takeaways
- 5G backhaul connects the radio access network to the 5G core and is essential for delivering end-to-end connectivity.
- Fiber optic provides very high capacity and low latency, making it suitable for permanent, high-traffic connections, but installation can require significant time and investment.
- Microwave links provide dedicated wireless connectivity between fixed locations and can be deployed quickly, provided that suitable radio conditions are available.
- IAB uses the 5G radio infrastructure for both access and backhaul, making it possible to extend connectivity without installing a dedicated wired connection at every node.
- A combination of technologies is often the most effective approach for private 5G networks, with each connection designed according to the site's conditions, traffic requirements and operational needs.